Settings Aid

Soneco Alarm Buttons are configured by sending SMS messages to the device while it is in the settings mode. Settings Aid assists you to define your settings.

By clicking "Continue" at the end of the page, the aid generates the setting messages.

Pointing on the question mark icons gives more information about the setting in hand.

Device Variant: ?

> CC3 (/SCS3) MC3
MC3 = The device sends Alarm SMS Messages to the numbers stored in the device
CC3 = The device makes a voice call to one of the stored telephone numbers and can send a text message to one or several numbers simultaneously.

Choose the Setting for CC3

The device can make a phone call only to the 1st number set in the device
The device can make a phone call to the 1st and the 2nd number set in the device
The device can make a phone call to the 1st, the 2nd and the 3rd number set in the device

The SMS message is sent to the 1st number
The SMS message is sent to the 2nd number
The SMS message is sent to the 3rd number

Telephone Numbers:

Number1:


Number2:


Number3:


SERVICE and EXTRA numbers:
EXTRA number4: ?


SERVICE number5: ?

Settings and Functions in Alarm Mode: ?

What happens when the button is pushed in standby mode?
The device lets the user to choose which number to call ?
The device starts the calling engine and tries to make a voice call to the first number ?

When the SMS messages are sent: ?
When the button is pressed
When the calling engine is initiated
Only when the calling engine has run through all the preset phone calls without an answer

Is an SMS sent to the EXTRA number?
No
The SMS message is sent to the EXTRA number when a phone call is dialed

Calling Engine: ?

How many times the device tries to call each of the numbers set in the device?
0 - Call engine disabled ?
1
2
3
4
5
6
7
8
9

What happens when the calling sequence of the calling engine is completed?
The device goes back to the standby mode
The device tries to make a phone call to the EXTRA number or one more time to the first number, if the EXTRA number is not been given ?

Duration of one dialing effort:
Notice! Make sure that none of the numbers has a voice mail or answering machine with a shorter response time than the one trialing effort lasts.
5 seconds
10 seconds
15 seconds
20 seconds
25 seconds
30 seconds
35 seconds
40 seconds
45 seconds

User Defined Alarm Message max.150 Characters: ?

Type your own message here.
150 characters left

Voice Call Settings:

The ear piece audio volume during a voice call
0: minimum setting.
1: suitable for silent environment when holding the phone on the ear
2: suitable for environments with background noise
3: allows some speaker-phone function in silent environment
4: maximum setting
Especially with the maximum volume the phone should not be pressed directly to the ear.

Ringtone volume: ?
0
1
2
3
4
5
6
7

Sensitivity of the microphone: ?
Mute
1
2
3
4
5
6
7

Additional Features:

Disable power-OFF by the user ?
Skip entry to programming mode ?
Forced power-ON ?
Sound assistance on ?
Automatic answering of incoming call ?
Reject unknown incoming calls ?
Button sensitivity ?
Enable button beeps from the buzzer
Enable dialing tone from the speaker upon initiation of the call
Enable ringing tone from the network as audio signal to earpiece
Enable buzzer beep when the called party answers
Enable the stepping tone of the calling engine ?
Enable a call to the emergency number 112 with a long press of a button ?
Caller indication: ?
The device sends its own number as defined by the network
The device instructs the network not to send the calling line number
The device asks the network to send the calling line number

Warning Message due to Low Battery: ?

Number1
Number2
Number3
EXTRA number
SERVICE number

PIN Code of the SIM Card (Optional): ?

Security Code for the Manufacturer’s Management Commands (Optional): ?

Device Info Message max.64 Characters (Optional): ?

Type your own message here.
64 characters left